Use function of adhesive sealing silica gel

Adhesive sealing silicone is widely used, and there are many materials that can be bonded. The specific functions can be summarized as follows:

1. Bonding function

The main function of the adhesive is to connect the bonded materials together. The stress transmission of the bonded object is more uniform than that of the traditional mechanical fastening method, and the end of the bonded object is also higher in strength, lower in cost and lighter in weight than that of the mechanical fastening method.

The adhesive can be used to bond various materials such as metal, plastic, rubber, glass, wood, paper and fiber. Dongguan shenhongmao Industrial Co., Ltd. mainly produces product materials for metal, plastic, rubber, glass and other household appliances, lighting, solar energy and automotive electronics.

2. Smooth appearance

The appearance of the objects bonded with adhesive is smooth and smooth, and the functional characteristics do not decline, which is particularly important for structural bonding. For example, in the household appliance industry, the structural parts in the LED lighting industry require clean appearance and high smoothness.

3. Surface anti-corrosion function

Through the surface treatment of the repair bonding material, the metal vulnerable to corrosion can be isolated with a layer of primer through the bonding layer to prevent the metal from being damaged by corrosion and achieve the purpose of bonding.

4. Sealing function

Sealing is actually a continuous bonding. This bonding method can easily seal the adhesive. Prevent the penetration of liquid and gas that may cause damage. Some adhesives can also replace solid or foam gaskets for sealing LED lighting and household appliances. Since the adhesive is mostly used in liquid state, it can also be used as potting, such as sealing of electronic circuit boards, motors, electrical and electronic components.

5. Repair function

Adhesive repair function of broken products. It is a common phenomenon that some products or parts break or crack. The conventional repair method is welding. However, welding often causes thermal deformation during repair. Especially for thin-walled parts, it is not easy to use. Only safe and reliable bonding method can be used.