Glue dropping process operation of silicone key

Now let's talk about the operation process of silicone key dropping!

1、 Mix the epoxy resin and curing agent according to a certain proportion, and then put them into the glue dropping pot;

2、 Use a glue dropping pot to pour an appropriate amount of epoxy resin into the surface of the silicone key for screen printing, radium carving process and oil spraying, and let it flow evenly to the surface of the silicone key;

3、 If the area of glue dripping is large or the amount of glue dripping is large, the product may produce glue dripping bubbles. In this case, you need to use a torch and spray fire to help

Assisting drainage of bubbles;

4、 Generally, after the silicone key is placed for 12H, the epoxy resin on its surface will also be cured;

5、 After the epoxy resin is cured, the glue dropping process is officially completed.