The trademark silicone ingredient method usually has a ratio of 10:1 or 1:1, and the ratio must be determined by mass using an electronic scale, because the density of the two components is different. If a measuring cup is used, it will lead to uneven ratio and poor local curing effect. During the operation and use, it is not allowed to come into contact with materials containing nitrogen, phosphorus, and sulfur. If in contact, it will cause the trademark silicone material to not solidify, leading to unnecessary waste of cost. Before testing, a skin test can be conducted to reduce cost waste. A common misconception is that there are people smoking or placing heavy metal gases in the air, and the operators have smoked before using tools such as stirring and scraping.
In addition to the conventional ratios mentioned above, there are also many other ratios that can be specially adjusted, but the production process and formula need to be changed in order to better improve production capacity, which is why the standards are unified. The main performance of trademark silicone is actually its own properties, such as its adhesion. Different silicone factories produce similar trademark adhesives, including fabrics made of different materials, which are completely different. Therefore, when searching for trademark materials, it is necessary to inform the operation process and the fabric material that needs to be bonded. For more unclear areas, you can consult our Xinjia for more professional answers.
In addition to liquid silicone molding, it is believed that some trademark silicone will also be made using solid silicone, which is relatively simple and requires the use of a molding machine to produce through high-temperature vulcanization molding process.
Whether it is liquid or solid, there is no distinction between good and bad. It is mainly made according to different production needs. If it is to be directly bonded to fabric products, liquid silicone is preferred. The trademark silicone of liquid can be formed as a whole. If solid silicone is used for production, the produced trademark silicone needs to be re bonded to the fabric with adhesive.
