Mingyi silicone（anhui）co,.ltd
Compared with general general rubber, the coordination components of all three categories of silicone rubber are relatively simple, and the hot vulcanization type is the same. In addition to raw......
2021-09-09In the production of silica gel products, low hardness silica gel products in molding control is not good there will be a broken edge position, this is commonly known as silica gel products burs......
2021-09-08Silicone rubber refers to a kind of elastomer whose molecular main chain is -Si-O-inorganic structure and side chain is organic group. Its high and low temperature resistance is good, and its us......
2021-09-08Silicon rubber is a linear polymer material. The main chain is composed of silicon oxygen bonds with strong bond energy. It has excellent light resistance, aging resistance, dielectric propertie......
2021-09-07Silicone rubber main chain is composed of Si-O-SI chain, Si-O-SI bond energy, high temperature resistance, good performance; The side chain is an organic group with large bond Angle, large degre......
2021-09-071, mixed rubber in order to prevent rubber sticking, spread talcum powder on the surface, or the rubber immersed in talcum powder dispersion in the tank cooling, fishing, rubber dry, talcum powd......
2021-09-06What is platinum sulfide? Platinum sulfide agent is also known as platinum water, A/B two-component, which is present in the catalyst In this case, hydrogen-containing silicone oil ......
2021-09-06The coloring methods of rubber products are mainly surface coloring and mixing coloring. Surface color is to spray the coloring agent to the surface of rubber products to make rubber products co......
2021-09-03People in the use of rubber products, at the same time, the life of the product has been in a shortened, the effect is by the survival environment of various trace elements as well as the people......
2021-09-03The main reasons for the generation of "self-sulfur" during the placement of mixed rubber materials are: (1) the use of vulcanizing agent, accelerator too much; (2) The loading capa......
2021-09-01(I) The treatment of the burnt rubber material: (1) Slight degree of focusing: The rubber material is put into the opening mill to roll thin, and the roll distance can be a little t......
2021-09-01Influence of vulcanization on structure and properties: Vulcanization is the last process in the production of rubber products. In this process, the rubber after a series of complex chemic......
2021-08-311. Why can the mixer change the high elastic raw rubber into plastic rubber? With the open mixer for plasticizing, mainly through the shear and extrusion effect of the two relative rotatio......
2021-08-31I. Reasons: 1, some auxiliary moisture absorption by wet rain and improper storage lead to excessive moisture content, such as light calcium heavy calcium clay silica carbon black and oth......
2021-08-30Mixing mill The use of open mixer is still very wide, now in many ways with the dense mixer can be replaced, but open mixer still has practical significance. 1, medium and small rub......
2021-08-30
