Liquid conductive silicone rubber is a new type of heat conduction and insulation material synthesized from silicone. It has the characteristics of no heat release, no corrosion and small shrinkage during curing. It is suitable for various heat conduction sealing and pouring of electronic components to form a heat conduction and insulation system.

Liquid conductive silicone rubber uses:

It is applicable to electronic and electrical components, LED junction box, wind energy motor, substrate, etc. with requirements for waterproof, insulation and heat conduction; As well as the bonding and sealing of various power modules, control modules, automotive HID ballast, lamps and various power control modules, the pouring and sealing of LED, LCD electronic display screen and circuit board, electronic sealing, pouring, waterproof and fixing.

Liquid conductive silicone rubber properties:

1. Curing at room temperature, fast curing speed, high production efficiency and easy to use;

2. It maintains elasticity in a wide temperature range, excellent insulation performance and good thermal conductivity;

3. Waterproof, moisture-proof, mildew and dust-proof, fixed components, chemical medium resistance, yellowing resistance and climate aging resistance.

Application process of conductive liquid silicone rubber:

1. Before mixing, the components and components shall be fully stirred in their respective containers.

2. When mixing, the weight ratio of component A: component B = 1:1 shall be observed.

3. After mixing evenly, it can be defoaming at 0.08m for 3 minutes, and the use effect is better.

4. The curing time effect of liquid silicone rubber is greatly affected by temperature. When the temperature is too low in winter, it can be heated appropriately to accelerate vulcanization.