In fact, the holes of silicone rubber products are made with molds in advance during the production design. There is no problem that holes need to be punched after the products are made, but when silicone rubber products are used in life, it will be necessary to add one more hole. For example, a hole in the silicone mobile phone cover can be used to fasten the mobile phone lanyard. In such cases, you may need to punch the silicone product yourself.

The material of silicone rubber has good flexibility and will not be damaged in normal use, but it is easy to tear if the silicone rubber product is damaged or cracked. Therefore, if you want to drill holes on the silicone rubber products, it is easy to damage the silicone rubber products. Therefore, if it is not too necessary, it is recommended not to drill holes for the silicone rubber products.

Of course, in special circumstances, if you must add a hole on the silicone rubber product, which method is the most reliable? Here are some ways to drill holes on silicone rubber products:

1. Silicone rubber products are not difficult to process without tools. Silicone rubber is sticky. The most common way is to punch. If it is to be made by hand, it can be cut with an art knife, but it is difficult to construct small holes and standard circles, so it needs to be shaped manually. Provide a technique - first burn a basic hole with a red burning metal stick, and then repair the shape with an art knife. It's easier.

2. You can do it with a laser, but you need to find a professional laser machine. It seems that few people have this condition. Yes, our size is too large. If we want a medium power laser, there should be melting.

3. If you don't have any tools that are difficult to process, you can try the thing for belt drilling. This is only a reference, because the belt hole is relatively large. If you need a hole and the product, this can be used as a reference, and you can make your own punching drill of the required size.

4. If you only punch, just use a punching machine, or find a knife die maker to make a set of knife dies.

5. Ordinary machining is OK. Grind a drill by yourself. It's easy to use.