Methods for preventing dust collection of silicone rubber products

Silicone rubber material does have powerful practical functions, and one of the advantages is that it is both beneficial and harmful. Dust and impurities are one of the weakest disadvantages of silicone rubber products, and the adsorption force is the main chemical nature of silicone rubber. Therefore, as many silicone rubber products in the market, dust and impurities cannot be solved. In life, silicone rubber coasters are one of them, What are the main reasons and treatment methods for silicone rubber products to absorb dust?

The phenomenon of dust and sticky sundries is the intrinsic chemistry of silica, and the phenomenon of adsorption is an inevitable factor in raw materials. Therefore, for the use of silicone rubber products in life, textile, plush and other places, it is certain that there will be sticky phenomena. However, such phenomena need to be handled and solved by the silicone rubber product processing factory.

It should be known that the adsorption force is the main reason for the silicone rubber products to collect dust. Therefore, the additives in the silicone and inorganic silicon are different in the raw materials, and the different adsorption methods can reduce the silicon chain sub structural units in the silicone rubber material. A large amount of water can be added to the raw materials while mixing to destroy the adsorption strength of the silicon hydroxyl group and reduce the active proportion in the silicone rubber adsorption.

The silicone rubber products after molding are not subject to the secondary treatment process, so the surface will have the ability to automatically absorb dust, and the electrostatic oil surface can be sprayed to cover the electrostatic absorption capacity. There are two treatment methods. Before the processing and production of the silicone rubber products, the anti-static adhesive is used to control the adsorption energy and (reduce the anode) of the silicone rubber in the raw materials. The other method is to spray the generated silicone rubber products, Spray anti-static oil on the surface of silicone products to achieve smooth, non-static effect.