What are the reasons for the errors between silicone buttons and expectations. With the increasing improvement of silicone button technology, the quality of silicone buttons produced is also getting better. In daily production, sometimes we encounter some problems, such as errors between the silicone buttons produced and the expected ones. So what are the reasons for these errors?
1. It is important to increase the temperature during molding above the mold temperature. It is important to know that the higher the temperature of the molding mold, the better its silicone raw material can be formed according to the molding mold due to temperature. The fluidity of the raw material is also closely related to the grinding activity, and the fluidity of the raw material is relatively poor. The size of the formed product will not have an error relationship with the expected size!
2. During the molding process, we apply a force to the silicone material. With a moderate force, we can compress the silicone material to a fixed size. Therefore, in terms of molding pressure, it is necessary to control a certain degree reasonably. For example, if the pressure is too high, the thickness will become thinner, and the size will also increase relatively. Otherwise, it is not the case.
3. Sometimes it may be a problem with the design of the mold itself, which is not rigorous and qualified. However, no matter how you adjust the size in production, you may find some slight errors because it is important to pay attention to the rigor of the mold during mold opening, and there should be no slight error with the product size. Generally speaking, problems with the mold itself are relatively rare in the silicone button production industry, but we cannot rule out this reason