How to improve quality during the manufacturing process of silicone molds?
Silicone mold manufacturing is a very complex process, from the initial design, processing, assembly, debugging and other steps to the actual use after Z, the impact of each process on the quality of silicone molds must be considered throughout the entire lifecycle, and every detail must be in place in order to improve the quality of the final mold in Z. How can silicone molds improve quality during the manufacturing process?
1. Choosing the right casting material directly affects the quality of the silicone mold. It is very important to choose materials with good performance and heat resistance in order to produce good products.
2. The design of silicone molds should be scientific and reasonable. For technical researchers, if they want to design something that meets the current market demand, they must design it reasonably, use standard mold structures, and complete the standardized execution of the quality of mold parts, the usability of mold structures, and the technical processability.
3. A complete quenching process is essential for silicone molds. The quenching steps must be operated correctly. If one step is operated incorrectly, it can cause quality problems in the produced molds, leading to the inability to use plastic molds or shortening their service life.
4. Mold assembly: Silicone mold assembly is like assembling a machine, where every component and every screw must not go wrong. Otherwise, the consequences can be quite serious, ranging from product defects and affecting production to complete damage to the mold and resulting in scrapping. So the assembly work must be very meticulous. During the assembly process, it is especially important to pay attention to the cleanliness of the mold, especially the waterways and screw holes, and be sure to blow out the iron filings inside.
5. Mold maintenance: Mold maintenance mainly refers to the maintenance and upkeep during the production process. After each use of the mold, comprehensive maintenance should be carried out, especially the rust prevention of the forming part and the rust prevention of the main moving parts. Because the mold needs to be filled with water during the production process, it may get wet during installation or disassembly. Therefore, it is necessary to ensure that the mold is dry and then apply a layer of oil for protection.

High transparency mold making silicone rubber