1. Surface treatment of the mold: Before making silicone mold products, the surface of the mold should be treated (such as applying detergent, which must be wiped evenly with a cotton cloth). If it is a food grade resin mold, if there is sticking, it is necessary to use detergent to soak the mold.
2. Spray release agent treatment: If you are worried about sticking to the mold, spray release agent or brush Vaseline release agent on the product before pouring, but it needs to be air dried and then filled with silicone.
Every customer's difficulty in removing molds is different! So it is necessary to analyze why there is mold sticking based on the customer's operation! Kind reminder: Use an appropriate amount of detergent water bubbles and release agents. If the detergent water bubbles, air dry the mold before operation! Liquid silicone requires an appropriate amount!