High-Transparency Liquid Silicone Rubber – MY-LSR90 AB
This series applies to platinum cured addition type two-component common fumed high transparent liquid silicone rubber for injection molding process.
Technical data:
Physical Properties |
Model |
Appearance |
Viscosity |
Hardness |
Tensile Strength |
Elongation At Break |
Tear Strength |
Test Method |
|
|
|
GB/T 531.1-2008 |
GB/T 528-2009 |
GB/T 528-2009 |
GB/T 529-2008 |
Unit |
|
|
mPa.s |
A0 |
Mpa |
% |
KN/m |
Data |
MY-LSR9020 |
High Transparent |
800,000 |
20 |
5 |
600 |
10 |
MY-LSR9030 |
High Transparent |
850,000 |
30 |
6.5 |
680 |
15 |
|
MY-LSR9040 |
High Transparent |
850,000 |
40 |
7.5 |
680 |
25 |
|
MY-LSR9050 |
High Transparent |
900,000 |
50 |
9 |
600 |
30 |
|
MY-LSR9060 |
High Transparent |
950,000 |
58 |
8 |
450 |
35 |
|
MY-LSR9070 |
High Transparent |
950,000 |
68 |
6.5 |
350 |
25 |
|
MY-LSR9080 |
High Transparent |
1100,000 |
78 |
6 |
150 |
12 |
Advantage:
Fast curing speed, high efficiency.
Excellent light transmittance.
Excellent rebound resilience.
Excellent heat stability and weather fastness (used temperature: -60℃~200℃).
Yellow-stain resistance.
Heat aging resistance.
Excellent mobility and injection.
Comply with FDA, RoHS, LFGB standards.
Low VOC.
Application:
High transparent parts like swimming goggles frame,baby products etc.
Processing technic:
Mixing Ratio: 1:1 weight mixing.
Test Condition: Mold temperature 120℃,cured time 5 minutes.
Package and storage:
Package :20Kg/Pail, 200Kg/Drum.
Storage Condition:Room temperature less than 30℃,do not contact water, avoid sun exposure.
Expiry Date:12 months, finish within 6 months is the best.